We are deploying a consumer IoT (Internet of Things) device, with each device connected to a cloud service that acts as the platform from which it will be controlled. The device itself is not dangerous: it is a simple, slimmed-down tablet to be used in hotel chains to replace an alarm clock and TV remote, and to provide access to room service. The device is battery operated, rechargeable, and cheap enough that hopefully no one will want to steal it. Guests cannot load any information into it, andunlike a typical tabletit does not serve as a Web browser.
We have an engineer who seems overly worried about the security of the communication between the device and the back end. We are working on the alpha version of the system now. All communication between the device and the cloud is unencrypted, and no user data crosses the network. Who cares what TV channel you are watching or what you ate for breakfast? On such a lightweight embedded device, the battery-life cost of encryption is significant and reduces battery life by 25% in our tests. We expect many users will not replace them in their charging cradles, since most people cannot remember to charge their own phones every night; thus, battery life will be very important to the project.
Even if we do turn on some encryption, we would like it to be as little as possible, again, to preserve battery life. I know a longer key is harder to break, but it also means that we will be using a lot more of the battery protecting what is, in reality, data that is hardly a state secret. What do you think is the right level of encryption, if any, to use in such a system, and how can we get the annoying engineer to shut up?
Not So Secret
It is true that many security-focused engineers can sound like Chicken Little, running around announcing that the sky is falling, but, unless you have been living under a rock, you will notice that, indeed, the sky is falling. Not a day goes by without a significant attack against networked systems making the news, and the Internet of Terror is leading the charge in taking distributed systems down the road to hella road that you wish to pave with your good intentions.
Before I get to the question of encryption and key length, I would like to point out two things. An IoT device is nothing more than an embedded system with a TCP/IP stack. It is not a magical object that is somehow protected from attackers because of how cool, interesting, or colorful it is.
Second, and I cannot believe I have to point this out to people who would read or write to KV, but the Internet has a lot of stuff on it, and it is getting bigger every day. Once upon a time, there were fewer than 100 nodes on the Internet, and that time is long past. KV has three Internet-enabled devices within arm's reach, and, if you think a billion users of the Internet aren't scary, try multiplying that by 10 once every fridge, microwave, and hotel alarm clock can spew packets into the ether(net).
Let's get this straight: if you attach something to a networkany networkit had better be secured as well as possible, because I am quite tired of being awakened by the sound of the gnashing of teeth caused by each and every new network security breach. The Internet reaches everywhere, and if even one-tenth of 1% of the people on it are bad actors, then that is one million potential attackers across the earth, and each one may be in control of far more than three devices!
Encryption, in and of itself, is not a solution to securing a system. There are many components that go into building a secure system and service, most of which I will not go into here due to limitation of space and my blood pressure medicine, which my doctor tells me not to grind between my teeth. Encrypted communication is one tool to be used when securing a networked service. You say there are no "state secrets" in your system, and, I guess, so long as the president is not staying in one of your IoT-equipped hotels, perhaps that is true. Even if the president no longer eats children for breakfast, there are plenty of other risks involved in building a system as you have described.
If attackers gain access to the private Wi-Fi network the hotel uses to deploy your systemwhich is likely, because the hotel will probably pick a password such as "1234567890"then they can see all the traffic used to perform operations. Want to wake your neighbors at 01:00, 03:00, and 05:00? Simple, just create a request with their room number and the appropriate settings. Perhaps you would like to put a hotel out of business? Easy enough, just order expensive champagne from room service for everyone staying in the hotel. Hotel guests will gladly accept it and then sue to have it removed from their bills. Attacks do not have to occur at the NSA/FSB/GCHQ or similar levels to run you and your customers out of business. I think you can see why your engineer is talking about encryption.
Encryption, in and of itself, is not a solution to securing a system.
You did not mention authentication at all, so let's talk a bit about that as well, because authentication protocols also require the use of cryptographic algorithmsthe ones, you complain, that drain your batteries. The system you describe needs the ability to discern who made a request as a way of preventing the attack I just described, where I ordered champagne for everyone in the hotel. How are you going to ensure that room 243 really ordered those drinks?
Now that I have convinced you that connections to the back-end system need to be both encrypted and authenticated, we can split hairs on how big a key to use, and, you know what they say, the bigger the key, the deeper the lock! Choosing algorithms and key sizes is where we can start to talk about device features and power usage.
At the moment, the AES (Advanced Encryption Standard) set of algorithms is what is used most often for encryption, and this protocol has at least three standard key lengths: 128, 192, and 256 bits. There are various recommendations on key lengths, but I rather like the comparison of several sets of recommendations on this website: https://www.keylength.com/en/4/. NSAwhoops, I mean NISTsuggests AES-128 as a minimum from 2016 through 2030, and as your system (likely) does not contain state secrets, it ought to be sufficient for your use.
Many embedded microprocessors now come with dedicated circuits to offload cryptographic operations. The offloading of crypto algorithms is nothing new and is subject to the same "cycle of life" that we see in other areas of software and systems engineering, where specialized services first appear as add-on peripherals, then show up in the CPU itself. In the 1990s, micro-processors were unable to keep up with the then-new algorithms being used to set up virtual private networks (VPNs), so companies produced cryptographic offload chips.
Processors got faster and larger, and what could not be handled by frequency scaling was put into special instructions to handle the harder parts of crypto. Embedded processors, like all processors, continue to gain more circuits, including those for cryptography. Any device, such as yours, that drives a display is bound to have some sort of cryptographic engine, and the only reason to ignore it is sheer laziness. It is very likely that your embedded processor already has acceleration for AES, and if it does not, spend a quarter and buy a better one.
Kode Vicious Battles On
A koder with attitude, KV answers your questions. Miss Manners he ain't. http://queue.acm.org/detail.cfm?id=1059801
Pervasive, Dynamic Authentication of Physical Items
Mandel Yu and Srinivas Devadas
The use of silicon PUF circuits http://queue.acm.org/detail.cfm?id=3047967
Security Collapse in the HTTPS Market
Axel Arnbak, et al.
Assessing legal and technical solutions to secure HTTPS http://queue.acm.org/detail.cfm?id=2673311
The Digital Library is published by the Association for Computing Machinery. Copyright © 2017 ACM, Inc.
Well written George. First place to start would be the computer engineers as majority of us still take security lightly. Recent breaches should give us enough cause for concern as we are connecting more and more devices to the network.
Displaying 1 comment