Home/Magazine Archive/October 2016 (Vol. 59, No. 10)/Efficient Parallelization sing Rank Convergence in.../Full Text

Research highlights
# Efficient Parallelization sing Rank Convergence in Dynamic Programming Algorithms

This paper proposes an efficient parallel algorithm for an important class of dynamic programming problems that includes Viterbi, Needleman–Wunsch, Smith–Waterman, and Longest Common Subsequence. In dynamic programming, the subproblems that do not depend on each other, and thus can be computed in parallel, form stages, or *wavefronts.* The algorithm presented in this paper provides additional parallelism allowing multiple stages to be computed in parallel despite dependences among them. The correctness and the performance of the algorithm relies on rank convergence properties of matrix multiplication in the tropical semiring, formed with plus as the multiplicative operation and max as the additive operation.

This paper demonstrates the efficiency of the parallel algorithm by showing significant speedups on a variety of important dynamic programming problems. In particular, the parallel Viterbi decoder is up to 24× faster (with 64 processors) than a highly optimized commercial baseline.

Dynamic programming^{2} is a method to solve a variety of important optimization problems in computer science, economics, genomics, and finance. Figure 1 describes two such examples: Viterbi,^{23} which finds the most-likely path through a hidden-Markov model for a sequence of observations, and LCS,^{10} which finds the longest common subsequence between two input strings. Dynamic programming algorithms proceed by recursively solving a series of sub-problems, usually represented as cells in a table as shown in the figure. The solution to a subproblem is constructed from solutions to an appropriate set of subproblems, as shown by the respective recurrence relation in the figure.

These data-dependences naturally group subproblems into *stages* whose solutions do not depend on each other. For example, all subproblems in a column form a stage in Viterbi and all subproblems in an anti-diagonal form a stage in LCS. A predominant method for parallelizing dynamic programming is *wavefront* parallelization,^{15} which computes all sub-problems within a stage in parallel.

In contrast, this paper breaks data-dependences *across* stages and fixes up incorrect values later in the algorithm. Therefore, this approach exposes parallelism for a class of dynamic programming algorithms we call *linear-tropical dynamic programming* (LTDP). A LTDP computation can be viewed as performing a sequence of matrix multiplications in the tropical semiring where the semiring is formed with addition as the multiplicative operator and max as the additive operator. This paper demonstrates that several important optimization problems such as Viterbi, LCS, Smith–Waterman, and Needleman–Wunsch (the latter two are used in bioinformatics for sequence alignment) belong to LTDP. To efficiently break data-dependences across stages, the algorithm uses *rank convergence*, a property by which the rank of a sequence of matrix products in the tropical semiring is likely to converge to 1.

A key advantage of our parallel algorithm is its ability to simultaneously use both the coarse-grained parallelism across stages and the fine-grained wavefront parallelism within a stage^{a}. Moreover, the algorithm can reuse existing highly optimized implementations that exploit wavefront parallelism with little modification. As a consequence, our implementation achieves multiplicative speedups over existing implementations. For instance, the parallel Viterbi decoder is up to 24× faster with 64 cores than a state-of-the-art commercial baseline.^{18} This paper demonstrates similar speedups for other LTDP instances.

**2.1. Tropical semiring**

An important set of dynamic programming algorithms can be expressed in an algebra known as *the tropical semiring.* The tropical semiring has two binary operators: ⊕ where *x* ⊕ *y* = max(*x,y*), and ⊗ where *x* ⊗ *y* = *x* + *y* for all*x* and *y* in the domain. The domain of the tropical semiring is {ℝ ∪ {−∞}}, the set of real numbers extended with −∞, which serves as the of the semiring, meaning that and . Most properties of ordinary algebra also hold in the tropical semiring, allowing it to support an algebra of matrices over elements of the semiring. For a more detailed discussion of the tropical semiring refer to Section 2 in Ref.^{13}

Let *A*_{n × m} denote a matrix with *n* rows and *m* columns with elements from the domain of the tropical semiring. Let *A*[*i, j*] denote the element of *A* at the *i*th row and *j*th column. The matrix product of *A*_{l × m} and *B*_{m × n} is *A* ࣻ *B*, an *l* × *n* matrix defined such that

Note, this is the standard matrix product with multiplication replaced by + and addition replaced by max.

The transpose of *A*_{n × m} is the matrix such that . Using standard terminology, we will denote a *v*_{n × 1} matrix as the column vector , a *v*_{1 × n} matrix as the row vector , and an *x*_{1 × 1} matrix simply as the scalar *x* (in which case, by a conventional use of notation, we identify *x* as *x*_{1, 1}). This terminology allows us to extend the definition of matrix–matrix multiplication above to matrix–vector and vector–scalar multiplication appropriately. Also, [*i*] is the *i*th element of a vector . It is easy to check that matrix multiplication is associative in the tropical semiring: .

**2.3. Parallel vectors**

Two vectors and are parallel in the tropical semiring, denoted as , if there exist non- scalars *x* and *y* such that . Intuitively, parallel vectors and in the tropical semiring differ by a constant offset. For instance, [1 0 2]^{T} and [3 2 4]^{T} are parallel vectors differing by an offset 2.

**2.4. Matrix rank**

The rank of a matrix *M*_{m x n}, denoted by rank(*M*), is the smallest number *r* such that there exist matrices *C*_{m x r} and *R*_{r x n} whose product is *M*. In particular, a rank-1 matrix is a product of a column vector and a row vector. (There are alternate ways to define the rank of a matrix in semirings, such as the number of linearly independent rows or columns in a matrix. While such definitions coincide in ordinary linear algebra, they are not equivalent in arbitrary semirings.^{4})

LEMMA 1. *For any vectors and , and a matrix A of rank 1, A*

Intuitively, this lemma states that a rank-1 matrix maps all vectors to a line. If rank(*A*) = 1 then it is the product of a column vector and a row vector . For any vectors and :

for appropriate scalars *x _{u}* and

*A* = [1 2 3]^{T} [0 1 2] is rank-1. *A* = [6 7 8]^{T} and *A* = [4 5 6]^{T} which are parallel with a constant offset 2. Also note that all rows in a rank-1 matrix are parallel to each other.

Dynamic programming is a method for solving problems that have optimal substructure—the solution to a problem can be obtained from the solutions to a set of its overlapping subproblems. This dependence between subproblems is captured by a recurrence equation. Classic dynamic programming implementations solve the subproblems iteratively applying the recurrence equation in an order that respects the dependence between subproblems.

**3.1. LTDP definition**

A dynamic programming problem is LTDP if (a) its solution and the solutions of its subproblems are in the domain of the tropical semiring, (b) the subproblems can be grouped into a sequence of stages such that the solution to a subproblem in a stage depends on only the solutions in the previous stage, and (c) this dependence is linear in the tropical semiring. In other words, *s _{i}*[

for appropriate constants *A _{i}*[

for appropriate matrices of constants *A _{i}* derived from the recurrence equation. We will call the

**3.2. Backward phase**

Once all the subproblems are solved, finding the solution to the underlying LTDP optimization problem usually involves tracing the *predecessors* of subproblems backward. A predecessor of a subproblem is the subproblem for which the maximum in Equation (1) is reached. For ease of exposition, we define the *predecessor product* of a matrix *A* and a vector as the vector *A* ∗ such that

Note the similarity between this definition and Equation (1). We assume that ties in arg max are broken deterministically. The following lemma shows that predecessor products do not distinguish between parallel vectors, a property that will be useful later.

This follows from the fact that parallel vectors in the tropical semiring differ by a constant and that arg max is invariant when a constant is added to all its arguments.

**3.3. Sequential LTDP**

The *sequential* algorithm for LTDP can be phrased in terms of matrix multiplications using Equations 2. Assume that the LTDP problem has *n* + 1 stages where is the initial solution vector given as an input argument and are the desired output solutions. The output solutions can be computed using the transformation matrices *A*_{1},...,*A _{n}* which capture the inductive case of the LTDP recurrence as shown in Equation (2). The sequential algorithm consists of a forward phase and a backward phase.

The forward phase computes the solution iteratively in *n* iterations. In iteration *i*, it computes and . This algorithm is deemed sequential because it computes the stages one after the other due to the data-dependence across stages.

The backward phase iteratively follows the predecessors of solutions computed in the forward phase. Depending on the LTDP problem, one of the subproblems in the last stage, say *s _{n}*

These are easily computed by in linear time by tracing the path backwards from stage *n* to stage 0.

The exposition above consciously hides a lot of details in the and ∗ operators. An implementation does not need to represent the solutions in a stage as a (dense) vector and perform (dense) matrix-vector operations. It might statically know that the current solution depends on only some of the subproblems in the previous stage (a sparse matrix) and only accesses those. Moreover, as mentioned above, an implementation might use wavefront parallelism to compute the solutions in a stage in parallel. Finally, implementations can use techniques such as tiling to improve the cache-efficiency of the sequential computation. All these implementation details are orthogonal to how the parallel algorithm described in this paper parallelizes across stages.

This section describes an efficient parallel algorithm for the sequential algorithm described in Section 4 across stages.

**4.1. Breaking data-dependences across stages**

Viewing LTDP computation as matrix multiplication in the tropical semiring provides a way to break data-dependences among stages. Consider the solution vector at the last stages . From Equation (2), we have

Standard techniques^{9, 12} can parallelize this computation using the associativity of matrix multiplication. For instance, two processors can compute the partial products *A*_{⌊n/2⌋+1} and in parallel, and then compute *A _{hi}*

However, doing so converts a sequential computation that performs matrix–vector multiplications (working from right to left) to a parallel computation that performs matrix–matrix multiplications. This results in a parallelization overhead linear in the size of the stages and thus requires a linear number of processors to observe a constant speedup. In practice, the size of each stage can easily be hundreds or larger and thus is not practical on real problems and hardware.

The key contribution of this paper is a parallel algorithm that avoids the overhead of matrix–matrix multiplications. This algorithm relies on the convergence of matrix rank in the tropical semiring as discussed below. Its exposition requires the following definition: For a given LTDP instance, the *partial product M*_{i→j}, defined for stages *i* ≤ *j*, is given by

Note that *M*_{i→rj} describes how stage *j* depends on stage *i*, because .

**4.2. Rank convergence**

The rank of the product of two matrices is not greater than the rank of either input matrix.

This is because, if rank(*A*) = *r*, then *A* = *C* *R* for some matrix *C* with *r* columns. Thus, *A* *B* = (*C* *R*) *B* = *C* (*R* *B*) implying that rank(*A* *B*) ≤ rank(*A*). A similar argument shows that rank(*A* *B*) ≤ rank(*B*).

Equation 3 implies that for stages *k* ≥ *j* ≥ *i*

In effect, as the LTDP computation proceeds, the rank of the partial products will never increase. Theoretically, there is a possibility that the ranks do not decrease. However, we have observed this only for carefully crafted problem instances that are unlikely to occur in practice. On the contrary, the rank of these partial products is likely to converge to 1, as will be demonstrated in Section 6.1.

Consider a partial product *M*_{i→j} whose rank is 1. Intuitively, this implies a *weak* dependence between stages *i* and *j.* Instead of the actual solution vector , say the LTDP computation starts with a different vector at stage *i.* From Lemma 1, the new solution vector at stage *j*, , is parallel to the actual solution vector . Essentially, the direction of the solution vector at stage *j* is independent of stage *i*; stage *i* determines only its magnitude. In the tropical semiring, where the multiplicative operator is +, this means that the solution vector at stage *j* will be, at worst, off by a constant if one starts stage *i* with an arbitrary vector.

**4.3. Parallel forward phase**

The parallel algorithm uses this insight to break dependences between stages, as shown pictorially in Figure 2. The figure uses three processors, *P*_{0}, *P*_{1}, and *P*_{2}, and six stages for each processor as an example, for a total of 18 stages beyond . Figure 2a represents the forward phase of the sequential algorithm described in Section 4. Each stage is represented as a vertical column of cells. (For pictorial simplicity, we assume each solution vector has length 4, but in general they might have different lengths.) Note that *P*_{0} also contains the initial solution ; note also that stage is shared between *P*_{0} and *P*_{1}, and similarly stage is shared between *P*_{1} and *P*_{2}. These replicated stages are differentiated by dotted borders. Each stage is computed by multiplying by the transformation matrix *A _{i}* (Equation 2). Processor

In the parallel algorithm shown in Figure 2b, processors *P*_{1} and *P*_{2} start from *arbitrary* solutions and respectively in parallel with *P*_{0}. Of course, the solutions for the stages computed by *P*_{1} and *P*_{2} will start out as completely wrong (shaded dark in the figure). However, if rank convergence occurs, then these erroneous solution vectors will eventually become parallel to the actual solution vectors (shaded gray in the figure). Thus, *P*_{1} will generate some solution vector parallel to .

In a subsequent *fixup phase*, shown in Figure 2c, *P*_{1} uses computed by *P*_{0}, and *P*_{2} uses computed by *P*_{1}, to fix stages that are not parallel to the actual solution vector at that stage. The fixup phase terminates when a newly computed stage is parallel to (off by a constant from) the computed one from the forward phase. (If rank convergence had not occurred with *P*_{1}, then in the fixup phase, *P*_{1} might have had to fix all of its stages including since it is not parallel to the it had computed from . In such a case, *P*_{2} would need to re-perform its fixup phase. Thus, in the worst case, the parallel algorithm reduces gracefully to the serial algorithm.) After the fixup, the solution vectors at each stage are either the same as or parallel to the actual solution vector at those respective stages.

For LTDP, it is not necessary to compute the actual solution vectors. Because parallel vectors generate the same predecessor products (Lemma 2), following the predecessors in Figure 2c will generate the same solution as the following the predecessors in Figure 2a.

A general version of this algorithm with pseudocode is discussed in Section 4 of Ref.^{13} For correctness (see Section 4.4 in Ref.^{13}), the parallel algorithm requires that every entry in the arbitrary vectors ( and in Figure 2) be non-. The backward phase can also be parallelized using ideas similar to those used in the forward phase (see Section 4.6 in Ref.^{13}).

**4.4. Rank convergence discussion**

One can view solving a LTDP problem as computing shortest (or longest) paths in a graph. In this graph, each subproblem is a node and directed edges represent the dependences between subproblems. The weights on edges represent the constants *A _{i}*[

Entries in the partial product *M _{l→r}* represent the cost of the shortest (or longest) path from a node in stage

This section shows LTDP solutions for four important optimization problems: Viterbi, Longest Common Subsequence, Smith–Waterman, and Needleman–Wunsch. Our goal in choosing these particular problems is to provide an intuition on how problems with different structure can be viewed as LTDP. Other applications for LTDP, not evaluated in this paper, include dynamic time warping and seam carving.

**5.1. Viterbi**

The Viterbi algorithm^{23} finds the most likely sequence of states in a (discrete) hidden Markov model (HMM) for a given sequence of *n* observations. Its recurrence equation is shown in Figure 1a (refer to Ref.^{23} for the meaning of the *p _{i,j}* and

**5.2. Longest common subsequence**

LCS finds the longest common subsequence of two input strings *A* and *B.*^{10} The recurrence equation of LCS is shown in Figure 1b. Here, *C _{i,j}* is the length of the longest common subsequence of the first

Some applications of LCS, such as the `diff`

utility tool, are only interested in solutions that are at most a width *w* away from main diagonal, ensuring that the LCS is still reasonably similar to the input strings. For these applications, the recurrence relation can be modified such that *C _{i,j}* is set to −∞ whenever |

Grouping the subproblems of LCS into stages can be done in two ways, as shown in Figure 3. In the first approach, the stages correspond to anti-diagonals, such as the stage consisting of *z _{i}*s in Figure 3a. This stage depends on two previous stages (on

In the second approach, the stages correspond to the rows (or columns) as shown in Figure 3b. The recurrence needs to be unrolled to avoid dependences between subproblems within a stage. For instance, *q _{i}* depends on all

**5.3. Needleman–Wunsch**

This algorithm^{17} finds a *global* alignment of two input sequences, commonly used to align protein or DNA sequences. The recurrence equation is very similar to the one in LCS.

In this equation, *s _{i,j}* is the score of the best alignment for the prefix of length

**5.4. Smith–Waterman**

This algorithm^{19} performs a *local* sequence alignment, in contrast to Needleman–Wunsch. Given two input strings, Smith–Waterman finds the *substrings* of the input that have the best alignment, where longer substrings have a better alignment. In its simplest form, the recurrence equation is of the form

The key difference from Needleman–Wunsch is the 0 term in max which ensures that alignments "restart" whenever the score goes below zero. Because of this term, the constants in the *A _{i}* matrices in Equation 1 need to be set accordingly. This slight change significantly affects the convergence properties of Smith–Waterman (see Section 6.1).

This section evaluates the parallel LTDP algorithm on the four problems discussed in Section 5.

**6.1. LTDP rank convergence**

Determining whether the LTDP parallel algorithm benefits a dynamic programming problem requires: (1) the problem to be LTDP (discussed in Section 4) and (2) rank convergence to happen in a reasonable number of steps. This section demonstrates how rank convergence can be measured and evaluates it for the LTDP problems discussed in Section 5.

Rank convergence is an empirical property of a sequence of matrix multiplications that depends on both the LTDP recurrence relation and the input. Table 1 presents measurements of the number of steps required for rank convergence across different algorithms and inputs. For a LTDP instance, defined by the algorithm (column 1) and input (column 2), we first compute the actual solution vectors at each stage. Then, starting from a random all-non-zero vector at 200 different equally spaced stages, we measured the number of steps required to converge to a vector parallel to the actual solution vector. Columns 3, 4, and 5, respectively show the minimum, median, and maximum number of steps needed for convergence. For each input, column 2 specifies the computation width (the size of each stage). Each algorithm has a specific definition of width: for Viterbi decoder, width is the number of states for each decoder; in Smith–Waterman, it is the size of each query; and in LCS and Needleman–Wunsch, it is a fixed width around the diagonal of each stage. LCS in some cases never converged, so we left those entries blank. The rate of convergence is specific to the algorithm and input (e.g., Smith–Waterman converges fast while LCS sometimes does not converge) and, generally speaking, wider widths require more steps to converge. We use this table later in Section 6.3 to explain scalability of our approach.

**6.2. Environmental setup**

We conducted experiments on a shared-memory machine and on a distributed-memory machine. A shared-memory machine favors fast communication and is ideal for the wave-front approach. The distributed-memory machine has a larger number of processors, so we can better understand how our parallel algorithm scales. The shared-memory machine has 40 cores (Intel Xeon E7). The distributed-memory machine is called Stampede^{21}; for our experiments we used up to 128 cores (Intel Xeon E5). See Ref.^{13} for more details.

**6.3. Parallel LTDP benchmarks and performance**

This section evaluates the parallel algorithm on four LTDP problems. To substantiate our scalability results, we evaluate each benchmark across a wide variety of real-world inputs. We break the results down by the LTDP problem. For each LTDP problem, we used the best existing sequential algorithm as our baseline, as described below. For the parallel LTDP algorithm, we implemented the algorithm described in Section 4 and used the sequential baseline implementation as a black box to advance from one stage to the next.

**Viterbi decoder.** As our baseline, we used Spiral's^{18} Viterbi decoder, a highly optimized (via auto-tuning) decoder that utilizes SIMD to parallelize decoding within a stage. We use two real-world convolution codes, CDMA and LTE, which are commonly used in modern cell-phone networks. For each of these two convolution codes, we investigated the impact of four network packet sizes (2048, 4096, 8192, and 16,384), which determine the number of stages in the computation. For each size, we used Spiral's input generator to create 50 network packets and considered the average performance.

Figure 4 shows the performance, the speedup, and the efficiency of the two decoders. To evaluate the impact of different decoder sizes, each plot has four lines (one per network packet size). A point (*x, y*) in a performance/speedup plot with the primary *y*-axis on left, gives the throughput *y* (the number of bits processed in a second) in megabits per second (Mb/s) as a function of the number of processors *x* used to perform the Viterbi Decoding. The same point with the secondary *y*-axis on right shows the speedup *y* with *x* number of processors over the sequential performance. Note that Spiral sequential performance at *x* = 1 is almost the same for different packet sizes. The filled data points in the plots indicate that convergence occurred in the first iteration of the fixup phase in the parallel LTDP algorithm described in Section 4 (i.e., each processor's stage is large enough for convergence). The non-filled data points indicate that multiple iterations of the fixup loop were required.

Figure 4 demonstrates that (i) our approach provides significant speedups over the sequential baseline, and (ii) different convolution codes and network packet sizes have different performance characteristics. For example, with 64 processors, our CDMA Viterbi Decoder processing packets of size 16,384 decodes ∼ 24× faster than the sequential algorithm while this number is ∼ 13× for our LTE decoder. This difference is due to the fact that the amount of computation per bit in CDMA is four times as much as in LTE but the median of the convergence rate is almost the same (Table 1). Also, note that in Figure 4, larger network packet size provide better performance across all convolution codes (i.e., a network packet size of 16,384 is *always* the fastest implementation, regardless of convolution code) because the amount of re-computation (i.e., the part of the computation that has not converged), as a proportion of the overall computation, decreases with larger network packet size.

**Smith–Waterman.** Our baseline implements the fastest known CPU version, Farrar's algorithm, which utilizes SIMD to parallelize within a stage.^{5} For data, we aligned chromosomes 1, 2, 3, and 4 from the human reference genome hg19 as databases and four randomly selected expressed sequence tags as queries. All the inputs are publicly available to download from Ref.^{16} We reported the average of performance across all combinations of DNA and query (16 in total).

A point (*x, y*) in the performance/speedup plot in Figure 5 with the primary *y*-axis on left, gives the performance *y* in giga cell updates per second (GigaCUPS) as a function of the number of processors used to perform the Smith–Waterman alignment. GigaCUPS is a standard metric used in bioinformatics to measure the performance of DNA-based sequence alignment problems and refers to the number of cells (in a dynamic programming table) updated per second. Similar to the Viterbi decoder plots, the secondary *y*-axis on the left show the speedup for each number of processors.

The performance gain of our approach for this algorithm is significant. As Figure 5 demonstrates, the parallel LTDP algorithm delivers almost linear speedup with up to 128 processors. Our algorithm scales well with even higher numbers of processors, but we report only up to 128 processors to keep Figure 5 consistent with the others.

**Needleman–Wunsch.** Our baseline utilized SIMD parallelization *within* a stage by using the grouping technique shown in Figure 3a. For data, we used two pairs of DNA sequences as inputs: Human Chromosomes (21, 22) and (*X, Y*) from the human reference genome hg19. We used only the first 1 million elements of each sequence since Stampede does not have enough memory on a single node to store the cell values for the complete chromosomes. We also used just 4 different widths (1024, 2048, 4096, and 8192) since we found that widths larger than 8192 do not affect the final alignment score.

Figure 6 shows the performance and speedup of the Needleman–Wunsch algorithm parallelized using our approach. The rank convergence is dependent on the input data; consequently, the parallel LTDP algorithm performs differently with pairs (*X, Y*) and (21, 22), as can be seen in the figure. The plots in the figure show results for each of the width sizes: 1024, 2048, 4096, and 8192. Similar to the Viterbi decoder benchmark, filled/non-filled data points show whether convergence occurred in the first iteration of the fixup phase.

In Figure 6, larger widths perform worse than smaller ones since the convergence rate depends on the size of each stage in a LTDP instance.

**LCS.** Our baseline adapts the fastest known single-core algorithm for LCS that exploits bit-parallelism to parallelize the computation *within* a column.^{3, 11} This approach uses the grouping technique shown in Figure 3b. For data, we used the same input data as with Needleman–Wunsch except that we used the following 4 widths: 8192, 16,384, 32,768, and 65,536. We report performance numbers as for Needleman–Wunsch.

The performance and speedup plots in Figure 7 are very similar to those in Figure 6: The choice of input pair has a great impact on rank convergence, as can be seen in Figure 7.

**LTDP versus Wavefront.** We have also compared our LTDP parallel approach and the wavefront approach for LCS and Needleman–Wunsch. Refer to Section 6.4 in Ref.^{13} for details.

Due to its importance, there is a lot of prior work on parallelizing dynamic programming. Predominantly, implementations use wavefront parallelism to parallelize within a stage. For instance, Martins et al. build a message-passing-based implementation of sequence alignment dynamic programs (i.e., Smith–Waterman and Needleman–Wunsch) using wave-front parallelism.^{14} In contrast, this paper exploits parallelism across stages, which is orthogonal to wave-front parallelism.

Stivala et al. use an alternate strategy for parallelizing dynamic programming.^{20} They use a "top-down" approach that solves the dynamic programming problem by recursively solving the subproblems in parallel. To avoid redundant solutions to the same subproblem, they use a lock-free data structure that memoizes the result of the subproblems. This shared data structure makes it difficult to parallelize across multiple machines.

There is also a large body of theoretical work on the parallel complexity of instances of dynamic programming. Some of them^{1,8,22} view dynamic programming instances as finding a shortest path in an appropriate graph and compute all-pairs shortest paths in graph partitions in parallel. Our work builds on these insights and can be viewed as using rank convergence to compute the all-pairs shortest paths efficiently.

Prior works have also made and utilized observations similar to rank convergence. The classic work on Viterbi decoding^{24} uses the convergence of decoding paths to synchronize decoding and to save memory by truncating paths for the backward phase. Fettweis and Meyr^{6,7} use this observation to parallelize Viterbi decoding by processing overlapping chunks of the input. However, their parallelization can produce an erroneous decoding, albeit under extremely rare conditions.

This paper introduces a novel method for parallelizing a class of dynamic programming problems called linear-tropical dynamic programming problems, which includes important optimization problems such as Viterbi and longest common subsequence. The algorithm uses algebraic properties of the tropical semiring to break data dependence efficiently.

Our implementations show significant speedups over optimized sequential implementations. In particular, the parallel Viterbi decoding is up to 24× faster (with 64 cores) than a highly optimized commercial baseline.

While we evaluate our approach on a cluster, we expect equally impressive results on a variety of parallel hardware platforms (shared-memory machines, GPUs, and FPGAs).

This material is based upon work supported by the National Science Foundation under Grant No. CNS 1111407. The authors thank the Texas Advanced Computing Center for providing computation time on the Stampede cluster. We also greatly thank Guy Steele for his invaluable comments and efforts for editing this paper. We also extend our thanks to Serdar Tasiran and anonymous reviewers for useful feedback on the paper.

1. Apostolico, A., Atallah, M.J., Larmore, L.L., McFaddin, S. Efficient parallel algorithms for string editing and related problems. *SIAM J. Comput. 19*, 5 (1990), 968–988.

2. Bellman, R. *Dynamic Programming.* Princeton University Press, Princeton, NJ, 1957.

3. Deorowicz, S. Bit-parallel algorithm for the constrained longest common subsequence problem. *Fund. Inform. 99*, 4 (2010), 409–433.

4. Develin, M., Santos, F., Sturmfels, B. On the rank of a tropical matrix. *Combin. Comput Geom. 52* (2005), 213–242.

5. Farrar, M. Striped Smith-Waterman speeds database searches six times over other SIMD implementations. *Bioinformatics 23*, 2 (2007), 156–161.

6. Fettweis, G., Meyr, H. Feedforward architectures for parallel Viterbi decoding. *J. VLSI Signal Process. Syst.* 3, 1–2 (June 1991), 105–119.

7. Fettweis, G., Meyr, H. High-speed parallel Viterbi decoding: algorithm and VLSI-architecture. *Commun. Mag. IEEE 29*, 5 (1991), 46–55.

8. Galil, Z., Park, K. Parallel algorithms for dynamic programming recurrences with more than O(1) dependency. *J. Parallel Distrib. Comput. 21*, 2 (1994), 213–222.

9. Hillis, W.D., Steele, G.L., Jr. Data parallel algorithms. *Commun. ACM29*, 12 (Dec. 1986), 1170–1183.

10. Hirschberg, D.S. A linear space algorithm for computing maximal common subsequences. *Commun. ACM18*, 6 (June 1975), 341–343.

11. Hyyro, H. Bit-parallel LCS-length computation revisited. In *Proceedings of the 15th Australasian Workshop* on Combinatorial Algorithms (2004), 16–27.

12. Ladner, R.E., Fischer, M.J. Parallel prefix computation. *J. ACM 27*, 4 (Oct. 1980), 831–838.

13. Maleki, S., Musuvathi, M., Mytkowicz, T. Parallelizing dynamic programming through rank convergence. In *Proceedings of the 19th ACMSIGPLAN Symposium on Principles and Practice of Parallel Programming*, PPoPP '14 (New York, NY, USA, 2014). ACM, 219–232.

14. Martins, W.S., Cuvillo, J.B.D., Useche, F.J., Theobald, K.B., Gao, G. A multithreaded parallel implementation of a dynamic programming algorithm for sequence comparison. In *Pacific Symposium on Biocomputing* (2001), 311–322.

15. Muraoka, Y. Parallelism exposure and exploitation in programs. PhD thesis, University of Illinois at Urbana-Champaign (1971).

16. National Center for Biotechnology Information, http://www.ncbi.nlm.nih.gov/.2013.

17. Needleman, S.B., Wunsch, C.D. A general method applicable to the search for similarities in the amino acid sequence of two proteins. *J. Mol. Biol. 48* (1970) 443–453.

18. Puschel, M., Moura, J.M.F., Johnson, J., Padua, D., Veloso, M., Singer, B., Xiong, J., Franchetti, F., Gacic, A., Voronenko, Y., Chen, K., Johnson, R.W., Rizzolo, N. SPIRAL: code generation for DSP transforms. *Proceedings of the IEEE, Special Issue on "Program Generation, Optimization, and Adaptation" 93* (2005) 232–275.

19. Smith, T., Waterman, M. Identification of common molecular subsequences. *J. Mol. Biol. 147*, 1 (1981), 195–197.

20. Stivala, A., Stuckey, P.J., Garcia de la Banda, M., Hermenegildo, M., Wirth, A. Lock-free parallel dynamic programming. *J. Parallel Distrib. Comput. 70*, 8 (Aug. 2010), 839–848.

21. Texas Advanced Computing Center, http://www.tacc.utexas.edu/resources/hpc. *Stampede: Dell PowerEdge C8220 Cluster with Intel Xeon Phi coprocessors.*

22. Valiant, L.G., Skyum, S., Berkowitz, S., Rackoff, C. Fast parallel computation of polynomials using few processors. *SIAM J. Comput. 12*, 4 (1983), 641–644.

23. Viterbi, A. Error bounds for convolutional codes and an asymptotically optimum decoding algorithm. *IEEE Trans. Inform. Theory 13*, 2 (1967), 260–269.

24. Viterbi, A.J., Omura, J.K. *Principles of Digital Communication and Coding*. Communications and information theory. McGraw-Hill, New York, 1979. Autre réimpr.: 1985.

a. The definition of wavefront parallelism used here is more general and includes the common usage where a wavefront performs computations across logical iterations as in the LCS example in Figure 1a.

The original version of this paper is entitled "Parallelizing Dynamic Programming through Rank Convergence" and was published in ACM SIGPLAN Notices – PPoPP '14, August 2014, ACM.

Figure 1. Dynamic programming examples with dependences between stages. (a) the Viterbi algorithm and (b) the LCS algorithm.

Figure 2. Parallelization algorithm using rank convergence. (a) the sequential forward phase, (b) the parallel forward phase, and (c) the fixup phase.

Figure 3. Two ways of grouping the subproblems in LCS into stages so that each stage depends on only one previous stage. (a) anti-diagonal grouping and (b) row grouping.

Figure 4. Performance (Mb/S) and speedup of two Viterbi decoders. The non-filled data points indicate where processors have too few iterations to converge to rank 1

Figure 5. Smith–Waterman performance and speedup averages over four databases and four queries.

Figure 6. Performance and speedup of Needleman–Wunsch.

Figure 7. Performance and speedup results of Longest Common Subsequence.

**©2016 ACM 0001-0782/16/10**

Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and full citation on the first page. Copyright for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, to republish, to post on servers, or to redistribute to lists, requires prior specific permission and/or fee. Request permission to publish from [email protected] or fax (212) 869-0481.

The Digital Library is published by the Association for Computing Machinery. Copyright © 2016 ACM, Inc.

No entries found